Installation And Adjustment; Install And Adjustment - Pride Mobility FUSION e Manual Del Propietário

Before unpacking, please make sure that the appearance of the carton has no obvious
damage or crushing; it should list serial number and other related products.
(1) When opening the main body carton to pick up the power chair, keep the back
straight and bend the knee;
(2) Check that your rear wheel brake lever is locked;
(3) Let two people take the main body from the packing box and put it on the ground;
(4) Lift the backrest from the folded state then pull the black strip on the back, so
that the latch heads protruding from the fixed plate on both sides exit the fixing
plate. Turn the backrest, adjust to the required angle, loosen the black strap, and
then make the plug head be completely ejected from the hole of the fixing plate.
The sides are kept consistent. The angle of the backrest can be adjusted as
needed (Figure 8-1, 8-2).
8-1
(5) Open the seat box and take the seat out of the carton and install it on the power
chair.
8-4
8-6
Fusione

5. INSTALLATION AND ADJUSTMENT

8-2
8-5
8-7
- 11 -