Pride Mobility FUSION e Manual Del Propietário página 14

Warning
Especially when on a slope, please ensure the brake handle is in the engaged state,
otherwise the power chair may roll. Make sure that the brake lever is in the engaged
state after using to prevent this from happening.
(4) Backrest folding angle adjustment
Pull the middle black strap, so that the latch heads protruding from the fixing plate on
both sides exit the fixing plate. Then turn the backrest, adjust it to the required angle,
loosen the black strap, and then completely eject the latch head out from the hole of
the fixing plate. Make sure you are in the same hole on both sides. See Figure 8-2
(5) Seat quick release
Please note that the following instructions are for guidance only.
1. First separate the harness connector of the upper control handle from the main
connector (8-10);
2. Move the lever under the seat forward, drag the bottom of the seat, and hold the
backrest with the other hand (8-11);
3. Another person stand at the opposite side. One hand to hold the bottom of the
seat and the other hand held the backrest.
8-10
(6) Armrest adjustment
1. When adjusting the armrest up or down, first loosen the screws at the under of
handrail (8-12);
2. Pull the armrests up or down to desired position.
Fusione
8-12
8-11
- 13 -