Trouble Shooting Guide - Pride Mobility FUSION e Manual Del Propietário

SYMPTON
Shortened
range
Battery pack
not charging
or
battery gauge
shows empty
after charging
Battery
charging
current high
No drive
Motor runs
irregularly
and/or noisily
Fusione

9. TROUBLE SHOOTING GUIDE

POSSIBLE CAUSE
Batteries not charged for long
enough
Batteries weak and cannot
hold charge
Battery pack fault
Charge fault
Charger loom or plug
damaged
Loose connection
No output from wall outlet
Fuse in charger mains plug
blown
Button on battery pack has
popped out
Output fuse in charger blown
Faulty batteries
Power chair switched on
during charging
Brake-release lever
disengaged
Flat batteries
Power chair is not switched on
with key
Battery pack not engaged
properly
Charger plugged in
Button on battery pack
popped out
Disconnected loom or plugs
Control system fault
Electrical malfunction
Control system fault
SOLUTION
Charge batteries for eight
hours or more
Replace battery pack
Replace charger
Contact local mobility dealer
Check plugs and looms
Try a wall socket in a different
room
Unplug from wall & change
fuse
Switch off and press button
back in
Switch off and press button
back in
Unplug from wall and contact
dealer
Replace battery pack
Turn Power chair off
Engage brake-release lever
Charge battery pack
Ensure the key is switched on
Check battery pack is fully
engaged onto connectors
Unplug charger
Reset circuit-breaker button
Check all plugs & looms
Contact dealer
Contact dealer
Contact dealer
- 28 -