Battery Installation - Pride Mobility Power Lift Recliner Serie Manual Del Usuario

I V. A S S E M B L Y / D I S A S S E M B L Y

Battery Installation

Your power lift recliner may be equipped with a
battery backup system that will activate during a
power failure. The backup system is powered by two
9V batteries (not included) that need to be installed
into the external transformer.
Follow these steps to install the batteries:
1. Unplug the external transformer power cord
from the electrical outlet.
2. Open the marked battery door on the external
transformer.
3. Install two 9V batteries into the external
transformer (Fig. 4.2).
4. Replace the battery door.
NOTE: Always make
transformer is equipped with two fresh 9V
batteries, since the battery backup system does
not recharge itself. Fresh batteries are defined
as 9V alkaline batteries that are replaced every
time the battery backup system is activated
during a power failure, or once a year if the
battery backup system has not been activated.
NOTE: If you unplug your power lift recliner for an extended period of time (more than one hour),
remove the batteries from the external transformer. The power lift recliner will draw power from
the batteries even when it is not in use.
Power Lift Recliner Series
sure the external
www.pridemobility.com
BATTERY DOOR
EXTERNAL TRANSFORMER (TOP AND BOTTOM VIEW)
Figure 4.2 Power Lift Recliner Battery Backup
Location
POWER CORD
15