Quick Start Guide - Pride Mobility FUSION e Manual Del Propietário

3. QUICK START GUIDE

Assembly
When lifting always keep the back straight, bend the knees and use the lifting handles
provided.
Ensure your freewheel mechanism is fully engaged, so your power chair cannot move
while assembling.
Lift the seat onto the seat post and press down to ensure it is fully engaged.
Battery Charging
The battery MUST be charged for 12 hours before first use. Do not be tempted to use the
power chair unless the battery has been fully charged as failure to do this will result in
battery damage.
Connect the battery charger to the mains supply and the charging socket located on the
battery pack. Switch on the mains supply and then switch on the battery charger. RED
light = Power On, YELLOW Light = Charging and GREEN Light = Charge Complete.
Charge the power chair overnight after each use to maintain battery condition.
If you are in any doubt then please turn to pages 20 and 21 of this manual.
Typical Use
Designed for use on footpaths, for crossing roads and shopping. It should not be driven
through mud, water, snow, sand, loose gravel, long grass, or any other unsound surfaces.
Control Functions
Your power chair is equipped with the following features that can be found on the tiller
fascia panel:
On/ Off Switch, Alarm, Speed Control, head Light, Handle bar, Charging port, power and
Directional Control Levers.
If you have previously used or owned a power chair before you MUST still read the
Owner's Manual carefully to fully understand the controls and safety warnings.
If you are in any doubt of their functions then please turn to pages 12 and 15 of this
manual.
Fusione - 7 -