Device Connections - ResMed TxLink 2 Guia Del Usuario

Spares and accessories include:
•
Ethernet cable (25919)
•
Cable USB Type A to B (2 m) (22422)
•
TxLink 2 PAP device cable (power/communications) (22421)
•
24V AC/DC 90W Air11

Device connections

Only one therapy device should be connected at a time via the TxLink 2 PAP device cable
(power/communications).
1
DC power in/out
2
Ethernet
3
USB Type B
The DC power in/out connectors are identical. Connect the power supply unit to either connector and the
ResMed compatible therapy device to the other connector using the TxLink 2 PAP device cable
(power/communications).
PSG connections
TxLink 2 provides up to six analog DC outputs (A-F), which can be used to transmit the real-time streams
measured by the ResMed therapy device to a PSG system. To support many different types of PSG
systems, each DC output is available at three connection points. Each mono jack connector provides one
channel only. Each modular connector provides two channels.
1
3.5 mm mono jack connector (A-B, C-D, E-F)
2 6P6C modular connector (A+B, C+D, E+F)
3
4P4C modular connector (A+B, C+D, E+F)
For further information on setting up PSG connections, refer to the PSG manufacturer's guide.
2
power supply unit (39212 EUR)
™