Chapter 8 - Operator Working Position And Emergency Stop; Chapter 9 - Safety Rules And Regulations - Lavorwash SLG 700 ET Manual De Instrucciones

CHAPTER 8 – OPERATOR WORKING POSITION AND EMERGENCY STOP
•
WORKING POSITION:
When using the machine the operator must be in the working position shown in Fig. 7.
•
EMERGENCY STOP: PETROL VERSION
Release the forwards lever Detail 1 Fig. 6 and brake the sweeper with the force of Your arms, now put the
accelerator lever (on the motor) on the STOP position.
•
EMERGENCY STOP: BATTERY VERSION
Release the forwards lever Detail 1 Fig. 6 and brake the sweeper with the force of Your arms, now turn the start
key from right to left Detail 3 Fig. 6.
CHAPTER 9 – SAFETY RULES AND REGULATIONS
Although the machine conforms to all the safety regulations, there is always a certain
degree of risk involved with any type of machine, either due to incorrect use (see
paragraph relative to forbidden use) or inevitable risks due to the nature of the machine.
These risks are defi ned as "residual risks". The chapter shows a list of foreseeable
residual risks and how to minimize the deriving dangers.
•
Risk of lesions to limbs and eyes through using the machine without the supplied safety protections
correctly assembled and not damaged .
•
Risk of lesions to limbs through contact with the side brush or with the central brush in rotation . The
brushes may only be touched when the machine is off and with the added protection of heavy duty gloves
to avoid lesions caused by any sharp material remained in the brushes .
•
Risk of inhaling harmful substances or causing lesions to hands and eyes while emptying the refuse
container if this operation is made without suitable protections such as heavy duty gloves, glasses and
a protective breathing mask .
•
Risk of loss of control of the machine if used on gradients of more than 2% or if left parked on slopes,
as the machine is not fi tted with a braking device.
RESIDUAL RISKS: VALID FOR MODELS WITH ENDOTHERMIC ENGINES
Concerning risks involving the engine, the chapter "Safety rules and regulations" of the
hand-book enclosed with the documentation of the machine, must be studied carefully .
•
Risks of explosion or fi re while fi lling the engine with fuel if carried out while the engine is running or not
completely cooled. Make sure that, while fi lling the engine, there are no naked fl ames or sparks caused
by grinders, welders or other .
•
Risk of severe burns if any type of operation is carried out on the engine while it is running or not
completely cooled .
•
Risk of inhalation of exhaust gas in case of use in not adequately aired spaces .
•
Before re-charging the batteries make sure the room is well-ventilated or re-charge the batteries in
facilities set up specifi cally for this purpose.
RESIDUAL RISKS VALID FOR ALL MODEL AND VERSIONS
RESIDUAL RISKS: VALID FOR MODELS WITH BATTERIES
33