Ordinary Maintenance - Piron PF4003 Traducción De Las Instrucciones Originales

III.

ORDINARY MAINTENANCE

The user is solely responsible for ordinary maintenance. The Assistence Centre must be contacted for
extraordinary maintenance which requires a specialised authorised technician.
CLEANING: GENERAL RULES
Disconnect electrical power from the appliance and wait until the oven is cooled completely before
cleaning.
WARNING: the appliance should never be cleaned with high pressure water sprays.
ORDINARY CLEANING OF COOKING CHAMBER
It is advisable to clean the coking chamber daily so as to maintain correct levels of hygiene and avoid the
deterioration of steel.
Do not use high pressure water steam lances or steamers for cleaning. Acidic, abrasive, corrosive sand-
based or caustic soda based detergents are prohibited.
For manual cleaning follow the procedure below:
•
Turn on the appliance and set the temperature to 80°C.
•
Leave it on for 10 minutes on steam
•
Turn off the appliance and let it cool down
•
Clean with hot water and soap then rinse.
It is strictly prohibited to wash the cooking chamber in cooking temperatures higher than 70°C, scalding
danger.
Daily cleaning of the oven cooking chamber lining must be carried out with a non-abrasive detergent to
guarantee its full function.
Use plastic bristles or a sponge soave in vinegar and warm water in case of dirt crusts.
Warning: residue fats possibly present in the cooking chamber could catch fire when using the oven, hence it
is advisable to remove them quickly.
Only use products recommended by the manufacturer of the appliance.
EXTERNAL CLEANING
Only use a damp cloth with warm water or products suitable for cleaning stainless steel. Do not use acidic
products or ammonia.
WARNING: the appliance should never be cleaned with high pressure water sprays.
REPLACING LIGHT LAMPS
WARNING: Strictly adhere to the following procedure
in order to avoid electrocution or damage to people:
•
Disconnect the electrical connection of the oven
and leave it to cool.
• take off the side grids that hold the baking trays.
Unscrew the glass cover "A" while observing "C".
•
Replace the lamp "B" with one having the same
characteristics.
Screw back on glass cover "A" while observing
•
washer "C".
• Put the side grids back on ensuring they are well
fitted.
E n g l i s h | 11