Preparing For Installation - Piron PF4003 Traducción De Las Instrucciones Originales

E n g l i s h | 3
When ovens are placed on leavening cabinets,
stainless steel tables or other ovens, it is not
advisable to use shelves so high that the inside of
the oven is not at eye level. Apply the sticker included
in the packaging "Burning hazard", after installing the
oven at a height of 1.600mm from the ground. (See
image)
Make sure that it is placed so that the door may be fully opened.
Position it so that the back of the oven is easily accessible for maintenance, connection to the mains sockets,
and water.
The appliance is not meant to be fitted and a 5 cm space must be left all round it.
It is not advised to place it near heat, fryers or other hot liquids. If this is not possible at least respect the
following distances from machinery: 50 cm from the sides and above the appliance and 70 cm from behind.
Do not place the device near materials or containers of inflammable liquids (such as walls, furniture, screens,
gas canisters) as it can be a fire hazard. If this is not possible, cover the inflammable parts with fire and
heatproof material and by checking fire hazard regulations.
IV.

PREPARING FOR INSTALLATION

Remove the outer packaging (wooden caging and/or carton box) and dispose it in compliance with the laws
in force in the country of installation.
REMOVING PROTECTIVE FILM ETC.
Remove the protection film from the external and
internal walls. (See image)
Remove all information covering from the inside,
and take off all plastic packaging.
STAND ADJUSTMENT
Do not use the appliance without stands.
The adjustable stands are already screwed to the underside of the oven.
If they are not used, this prevents airflow from cooling the electric parts and outsides of the oven which
causes over-heating and damage to components.
The oven will function correctly if placed level on a flat surface by adjusting the stands accordingly and using
a spirit level. Screw or unscrew them as necessary to adjust.