Operation; Preparing The Cassette Tank - Dometic CT 4050 Instrucciones De Uso

CT(E), CTLP, CT(E)S, CTW
7

Operation

7.1

Preparing the cassette tank

Removing the cassette tank (fig. 3, page 4)
1. Open the service door.
2. Push the catch upwards to unlock the cassette tank.
3. Pull the cassette tank out of the cassette housing. When pulling out the tank,
resistance has to be overcome.
Filling the cassette tank
1. Position the cassette tank upright.
2. Rotate the drain pipe approx. 90° upwards (fig. 4, page 4).
I
NOTE
Avoid turning the drain pipe more than 90°, as it otherwise can come off
(fig. 4, page 4).
3. Twist off the cap (fig. 5, page 5).
4. Fill water into the cassette tank via the drain pipe (fig. 6, page 5).
With a tilted position (such as lasting inclination of the vehicle), the cassette may
only be 3/4 full. Otherwise overflowing through the vent is possible.
Adding sanitary additive
1. If using sanitary additives, observe the instructions for use on the packaging.
2. Position the cassette tank upright.
3. Rotate the drain pipe approx. 90° upwards (fig. 4, page 4).
I
NOTE
Avoid turning the drain pipe more than 90°, as it otherwise can come off
(fig. 4, page 4).
4. Twist off the cap (fig. 5, page 5).
5. Add sanitary additive into the cassette tank via the drain pipe (fig. 6, page 5).
Observe the instructions for the sanitary additive.
EN
Operation
21