Filling The Freshwater Tank (Integrated Tank); Using The Toilet - Dometic CT 4050 Instrucciones De Uso

Operation
Pushing the cassette tank into the cassette housing
A
NOTICE! Damage hazard
Ensure that the cassette tank can be pushed into the cassette housing
easily. Ensure that the cassette tank does not bump into other objects or
components.
1. Slide the cassette tank all the way into the cassette housing.
✔ The cassette tank lock locks by itself upon being pushed in.
2. Check that the cassette tank is securely installed.
3. Close and lock the service door.
7.2

Filling the freshwater tank (integrated tank)

➤ Fill the freshwater tank through the filler neck on the outside of the vehicle. The
amount depends on the tank used (the integrated tank's capacity is 7 liters for the
CTW4050 and CTW4110 models).
7.3

Using the toilet

I
NOTE
• Conventional toilet paper can clog the toilet. Use a special
fast-dissolving toilet paper.
• Sanitary additives for the holding tank decompose feces and prevent
unpleasant odors.
• The slider must be closed while driving, and no liquid should be
above the slider.
1. Open the toilet lid (fig. 7 1, page 6). The toilet lid remains in a position of
approx. 70°.
2. Before each use press the flush button
bowl (fig. 7 2, page 6).
3. Pull the slider forward (fig. 7 3, page 6). Leave the slider open during use.
4. After use press the flush button
CT, CTLP, CTS, CTW only
used a few more times.
5. Close the slider (fig. 8 2, page 6).
6. Close the toilet lid (fig. 8 3, page 6).
22
to allow some water to run into the
again to rinse the bowl (fig. 8 1, page 6).
: When the indicator
CT(E), CTLP, CT(E)S, CTW
lights up, the toilet can only be
EN