Product Identifi Cation; Transport And Storage; Lifting And Positioning The Product; Storing Ku 1 Curves - Bosch Rexroth KU 1 Instrucciones De Montaje

14/38 Bosch Rexroth AG
1: Part number
2: Designation
3: Information about version and
dimensions
4.3 Product identifi cation
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
Fig. 1 Name plate
5

Transport and Storage

• Observe the transport instructions on the packaging.
• See the shipping documents for transport weight.
• Secure the product to prevent toppling!
• When storing and transporting the product, always observe the ambient

conditions, see 37.
5.1

Lifting and positioning the product

WARNING
Lifted loads may fall!
Falling objects may result in severe injuries (or even death).

Always use lifting equipment with a suffi ciently high load bearing
capacity (see the shipping documents for product weight).

Before lifting the product, make sure that the carrying straps are
correctly fastened!

Secure the product to prevent toppling while lifting!

Make sure that no one is in the danger area when raising and
lowering, with the exception of the operator!
5.2

Storing KU 1 curves

• Only store the product on a fl at surface.
• For ambient conditions, see
• For curves with an assembled motor/gearbox combination:
Support the curve so that there is no load on the motor/gearbox
combination.
TS 1 | 3 842 531 106/2013-04
1
. . . . . .
. . .
3

38.
2
. . . . . . . . . .
Typschild