Bosch Rexroth KU 1 Instrucciones De Montaje página 56

18/38 Bosch Rexroth AG
5. Remove the drive train
upwards. Disconnect the drive
train and remove the toothed
drive belt. The toothed drive
belt remains loose in the
housing.
1
) Drive train: 2 top parts,
connected to the toothed belt
wheel (E) by the coupling and
hexagon shaft
6. Disassemble the top part of the
return heads (F).
7. Remove all toothed belts and
return rollers from the drive and
return heads.
8. Loosen the tensioning roller
(G) on the bottom of the curve
and remove the toothed drive
belt from the horizontal toothed
belt wheel (H). The toothed
drive belt remains loose in the
housing.
1
)
D
1
)
Fig. 3 Preparing for assembly (2/2)
E
7
E
H
TS 1 | 3 842 531 106/2013-04
D
1
)
SW2,5
M = 2Nm
D
F
6
SW5
M = 10Nm
D
G
531 106-07
8