8/38
Bosch Rexroth AG
2.4
Personnel qualifi cations
The work described in this documentation requires basic mechanical and
electrical knowledge, as well as knowledge of the appropriate technical
terms. In order to ensure operating safety, these activities may therefore
only be carried out by qualifi ed technical personnel or an instructed person
under the direction and supervision of qualifi ed personnel.
Qualifi ed personnel are those who can recognize possible hazards and
institute the appropriate safety measures due to their professional training,
knowledge, and experience, as well as their understanding of the relevant
conditions pertaining to the work to be done. Qualifi ed personnel must
observe the rules relevant to the subject area.
2.5
General safety instructions
• Observe the regulations for accident prevention and environmental
protection.
• Observe the safety instructions and regulations of the country in which
the product is used or operated.
• Exclusively use Rexroth products in good technical order and condition.
• Follow all instructions printed on the product.
• Persons who assemble, operate, or disassemble Rexroth products must
not consume any alcohol, drugs, or pharmaceuticals that may affect their
ability to respond.
• Only use accessories and spare parts approved by the manufacturer.
• Comply with the technical data and ambient conditions listed in the
product documentation.
• Check the product for visible transport damage.
TS 1 | 3 842 531 106/2013-04