Ambient Conditions; Pneumatics - Bosch Rexroth KU 1 Instrucciones De Montaje

38/38 Bosch Rexroth AG
Bosch Rexroth AG
Postfach 30 02 07
70442 Stuttgart, Germany
DC-IA/MKT
Telefax +49 711 811–7777
www.boschrexroth.com
[email protected]
15.1

Ambient conditions

• The transfer systems have been designed for stationary use in a location
that is protected from the elements.
• Operating +5°C to +40°C
temperature
–5°C to +60°C with 20% reduced load
• Storage temperature –25°C to +70°C
• Relative humidity 5% to 85%
• Air pressure > 84 kPa, appropriate height < 1400 m above sea
level
• Permissible fl oor load: 1000 kg/m
• Load values are reduced by 15% when the system is set up in a location
with an altitude > 1400 m.
• Avoid molds, fungi, rodents, and other vermin.
• Do not install or operate near industrial systems with chemical emissions.
• Do not install or operate near sandy or dusty sources.
• Do not install or operate in areas that are regularly jarred by high forces
caused by e.g. presses or heavy machinery.
• Resistant to many common media used in production such as water,
mineral oil, grease, and detergents. Contact your Rexroth representative
if you have any doubts about resistance to specifi c chemicals, such as
test oil, doped oils, aggressive detergents, solvents, or brake fl uid.
• Avoid long-term contact with acidic or basic reacting materials.
15.2

Pneumatics

• Oiled or non-oiled, fi ltered, dry compressed air.
• Operating pressure:
• Solids
– Particle size
– Particle quantity
• Humidity – water content
1
– Pressure dew point )
1
) The pressure dew point should be at least 15°C below the ambient temperature.
• Oil content
– Oil quantity
TS 1 | 3 842 531 106/2013-04
2
4 to 6 bar
 5 μm
 5 mg/m
3
 +3°C
 1 mg/m
3
Technische Änderungen vorbehalten
Subject to technical modifi cations
Sous réserve de modifi cations techniques
Soggetto a modifi che tecniche
Modifi caciones técnicas reservadas
Reservado o direito de modifi cações técnicas