Black and Decker BDX2700 Manual De Instrucciones página 21

All manuals and user guides at all-guides.com
OPERATIONAL POSSIBLE CAUSE
ISSUE
Will not draw Spray wand not in
chemicals low pressure
Chemical filter clogged
Chemical screen not
in cleaning solution
Chemical too thick
Pressure hose is too long
Chemical build up in
chemical injector
No or low Worn seal or packing
pressure
(after period of
normal use)
Worn or obstructed valves
Worn unloader piston
Water leaking at Worn or broken o-ring
gun/spray wand
Loose hose connection
connection
Water leaking Loose connections
at pump
Piston packings worn
Worn or broken o-rings
Pump head or tubes
damaged from freezing
Pump pulsates Nozzle obstructed
SOLUTION
See how to Use Spray
Wand paragraph in the
Operation Section
Clean filter
Make sure end of detergent
siphon hose is fully submerged
into cleaning solution
Dilute chemical. Chemical
should be the same
consistency as water
Lengthen water supply hose
instead of high pressure hose
Please contact our customer
service department at
www.power-washer.us
Please contact our customer
service department at
www.power-washer.us
Please contact our customer
service department at
www.power-washer.us
Please contact our customer
service department at
www.power-washer.us
Check and replace
Tighten
Tighten
Please contact our customer
service department at
www.power-washer.us
Please contact our customer
service department at
www.power-washer.us
Please contact our customer
service department at
www.power-washer.us
See Nozzle Cleaning
paragraph in the
Maintenance section for
the correct procedure
21 - ENG