Fitting And Removing The Wheel; Securing The Wheel; Removing The Wheel - Sicam SBM V655 Manual Original

en 34 | SBM V655 | Fitting and removing the wheel
6. Fitting and removing the
wheel
WARNING – Wheel slip!
Risk of crushing of fingers and other body
parts when attaching and removing wheel.
€ Wear protective gloves.
€
Wear safety shoes.
€
Do not place fingers between the wheel and
the shaft.
€
Heavy wheels should always be handled by
two people.
6.1

Securing the wheel

1. Switch on the SBM V655 with the On/Off switch.
2. Position a suitable cone on the shaft (flange).
3. Use a wire brush to remove any dirt.
4. Place the wheel on the shaft against the cone.
5. Push the unlocked quick-action clamping nut onto
the shaft and press firmly against the wheel.
3
|
656 234 2010-11-22
All manuals and user guides at all-guides.com
6. Release the lock and turn the quick-action clamping
"
6.2
1. Turn the quick-action clamping nut anti-clockwise
2. Unlock and take off the quick-action clamping nut.
3. Remove the wheel.
2
1
nut clockwise until the wheel is firmly braced.
The wheel is secure.

Removing the wheel

and release the wheel.
Sicam srl società unipersonale