Sbm V655 - Sicam SBM V655 Manual Original

3.5

SBM V655

14
13
11
12
Fig. 1: SBM V655
Item Designation
1 TFT monitor with
Control panel
2 Gauge arm
3 Wheel guard
4 Cone of drive shaft
5 Pedal
6 Vernier caliper
(electronic)
7 Tray
8 Clamping tool holders
9 Mains socket
10 On/off switch
11 Quick-action clamping nut
12 Centering flange
13 Manual vernier caliper
14 Measuring compasses
Sicam srl società unipersonale
All manuals and user guides at all-guides.com
10
9
Functions
+ Software display (measured values and operating instructions)
+ Operation of SBM V655, refer to Section 7
Determination of rim width
+ Protection of operator against flying particles (e. g. dirt, water).
+ Starting and stopping measurement, refer to Section 7.3
Flange mounting
+ Locking of shaft / wheel u.
+ Transfer of rim data o, refer to Section 7.3
+ Recording of rim distance and rim diameter.
+ Determination of positions for attachment of adhesive weights.
For storing balance weights and accessories
For storing accessories
Connection for power cord.
Switching SBM V655 on and off.
Centering and attachment of wheel on cone
Wheel attachment.
Can be used as substitute if the electronic vernier caliper is defective.
Can be used as substitute if the rim width and rim diameter cannot be recorded electronically.
Product description | SBM V655 | 29
1
7
8
en
2
3
6
4
5
|
656 234 2010-11-22