Cleaning And Maintenance - ResMed HumidAire 2iC Guia Del Usuario

Cleaning and Maintenance

You should regularly carry out the cleaning and maintenance described in this
section.
WARNING
!
Beware of electrocution. Do not immerse the device or power cord in water.
Always unplug the device before cleaning and be sure that it is dry before
plugging it back into a power outlet.
1
Turn the main power switch at the back of the device to OFF, and unplug the
power cord from the power outlet.
2
Remove the water chamber. To do this, lift the latch at the bottom of the water
chamber and pull the water chamber away from the docking station.
3
Discard any excess water by turning the water chamber upside down, allowing
the water to drain out of the air outlet.
4
Disassembling the Water Chamber
1. To open the side catches pull out from the lower edge.
2. Hold the water chamber as shown below:
front tab
Side catch
Cleaning and Maintenance 15