ResMed HumidAire 2iC Guia Del Usuario página 14

2
Separate the HumidAire 2iC water chamber from the docking station. To do this,
lift the latch at the bottom of the water chamber and pull the water chamber
away from the docking station.
3
Slide the humidifier docking station (with the water chamber detached) onto the
device until it clicks into place.
Notes
Under normal operation, there is no need to remove the HumidAire 2iC
•
docking station once it is attached to the CPAP , APAP , or bilevel device. If you
need to remove it, press the latch underneath the docking station and pull it
away from the device.
When removing the docking station, ensure that the water chamber is
•
removed first.
4
Insert the power cord into the socket at the rear of the device. Plug the other end
of the power cord into a power outlet.
WARNING
!
Make sure that the CPAP , APAP , or bilevel device is switched off at the
•
power outlet before connecting the HumidAire 2iC.
Make sure the power cord and plug are in good condition and the
•
equipment is not damaged.
10
Power
cord
Docking station
To
power
outlet