Operating Instructions; Starting Treatment; Stopping Treatment - ResMed HumidAire 2iC Guia Del Usuario

Operating Instructions

Starting Treatment

The HumidAire 2iC should be filled with fresh water and attached to the CPAP,
APAP, or bilevel device, with the air tubing and mask system connected. See
"Setting Up the HumidAire 2iC" on page 9.
1
Switch on the power at the power outlet. Switch the main power switch at the
back of the device ON.
When the device is turned on, a WELCOME message is displayed on the LCD.
2
If the option is available, select PASSOVER as the humidifier setting in the menu.
WARNING
!
Insufficient therapy may result if the incorrect humidifier setting is selected.
Note: Please refer to the relevant CPAP, APAP, or bilevel user's manual for
details on using the menus.
3
Fit your mask as described in the mask user instructions.
WARNING
!
Before starting therapy ensure that you are wearing the mask and that the
mask and air tubing are fitted correctly.
4
Press the Front key on the control panel. Alternately, if the SmartStart function
is enabled, simply breathe into the mask. Air should begin to flow from the
device.
5
Lie down and arrange the air tubing so that it is free to move if you turn in your
sleep.
WARNING
!
Do not leave long lengths of air tubing around the top of your bed. It could
twist around your head or neck while you are sleeping.

Stopping Treatment

To stop treatment at any time, remove your mask and press the Front key.
Alternately, if the SmartStart function is enabled, simply remove your mask and
treatment will end.
Main
power
switch
Operating Instructions 13