Display Symbols - HoMedics BPA-110 Manual

DISPLAY SYMBOLS:

If
area that systolic pressure should be displayed, an error has occurred
with your reading. See TROUBLESHOOTING section of this manual for
more information.
IB-BPA110_C--02.indd 10
All manuals and user guides at all-guides.com
User 1: Appears when the monitor is operated by User 1.
User 2: Appears when the monitor is operated by User 2.
Weak Battery Symbol: Appears when batteries should be
replaced.
Pulse Symbol: Shows the heart rate per minute.
Irregular Heartbeat Detector: For more information, refer
to the IRREGULAR HEARTBEAT DETECTOR section of this
manual.
START
START START
STOP
STOP
STOP
Memory Average: Displays average of last 3 readings
Risk Category Index: For more information, refer to the
RISK CATEGORY INDEX section of this manual.
START
STOP
and any of the following letters and numbers appear in the
Measurement Error: Measure again. Wrap the cuff
correctly and keep arm steady during measurement.
Air Circuit Abnormality: Check cuff connection. Measure
again.
Pressure Exceeding 300 mmHg: Turn the unit off to clear,
then measure again.
Error Determining Measurement Data: Measure again.
10
2011/12/6 下午 12: