Removing The Accessory Tool - Hilti SF 2H-A Manual Del Usuario

All manuals and user guides at all-guides.com
3. Insert the accessory tool in the chuck and then turn the keyless chuck
firmly until tight.
4. Check that the accessory tool is held securely.

5.10 Removing the accessory tool

1. Set the forward/reverse switch to the middle position or remove the
battery from the power tool.
2. Open the keyless chuck.
3. Pull the accessory tool out of the chuck.
5.11 Screwdriving
1. Set the function selector ring to the "screwdriving" position .
2. Set the torque setting ring to the desired torque.
3. Set the forward/reverse switch to the desired direction of rotation.
5.12 Drilling
1. Set the function selector ring to the "drilling" position
2. Set the forward/reverse switch to the "forward" position.
5.13 Hammer drilling
1. Set the function selector ring to the "hammer drilling" position
2. Set the forward/reverse switch to the "forward" position.
6 Care, maintenance, transport and storage
6.1 Care and maintenance of the tool
WARNING
Electrical hazards. Improper repairs to electrical parts may lead to
serious injuries.
▶ Electrical parts may be repaired only by trained electrical specialists.
▶ Keep the tool, especially its grip surfaces, clean and free from oil and
grease. Do not use cleaning agents containing silicone.
▶ Never operate the power tool when the ventilation slots are blocked.
Clean the air vents carefully using a dry brush. Do not permit foreign
objects to enter the interior of the tool.
▶ Clean the outer surfaces of the tool with a slightly damp cloth at regular
intervals.
6.2 Care of Li­ion batteries
▶ Keep the battery clean and free from oil and grease.
▶ Clean the outer surfaces of the tool with a slightly damp cloth at regular
intervals. Do not use cleaning agents containing silicone.
.
.
29