About This Documentation; Product Information - Hilti SF 2H-A Manual Del Usuario

All manuals and user guides at all-guides.com
1 Information about the documentation
1.1 Conventions
1.1.1 Warning signs
The following warning signs are used:
General warning
1.1.2 Symbols
The following symbols are used:
Read the operating instructions before use.
Instructions for use and other useful information
Rated speed under no load
Revolutions per minute
Direct current (DC)
Screwdriving
Drilling without hammering
Drilling with hammering action (hammer drilling)
1.1.3 Typographical emphasis
The following typographical features are used to emphasize important
passages in the technical documentation about your drill/driver:
1 These numbers refer to the corresponding illustrations.

1.2 About this documentation

▶ Read these operating instructions before the product is used or operated
for the first time. This is a is a prerequisite for safe, trouble-free handling
and use of the product.
▶ Observe the safety instructions and warnings printed in this documenta-
tion and on the tool.
▶ Always keep the operating instructions with the tool and make sure that
the operating instructions are with the tool when it is given to other
persons.

1.3 Product information

The type designation can be found on the type identification plate at the
base of the tool and the serial number on the side of the casing.
▶ Make a note of this data in the following table and always refer to it when
making an enquiry to your Hilti representative or Hilti Service Center.
18