Legal Information - Mälzer Dental CORSOART BKR Instrucciones De Uso

4
Geschlossene Zentrik
Closing the centric
The condyles are again fixed in place,
the centric is visibly closed�
10
Setting retrusion
Retrusion can be set after loosening
the locking screw�
Can be set from 0 mm to 2 mm

Legal information

All information in this documentation has been prepared with great careand is subject to changes and mistakes� We assume no
legal responsibility on consequences of incorrect information or improper use�
5
Condylar path inclination
Loosen the two HCI set screws with the
centric closed and set the angle for the
condylar path inclination on the con-
dylar housing� Re-tighten the HCI set
screws after setting the angle�
Angle can be set from −25° to +80°
11
Setting distraction
Distraction can be set after loosening
the locking screw on the side of the
articulator�
Can be set from 0 mm to 3 mm
6
Setting the Bennett angle
Loosen the locking screw and set the
Bennett angle to the desired position�
Angle can be set from 0° to +30°
12
Removable plates
The removable plate is secured with a
magnetic closure and can be removed
simply by lifting up and out�
Tool required
The special tool is located at the back of
the bottom half of the articulator�
11