Electric Hood Connection; Oven Positioning; First Starting - OEM MILLENIUM VALIDO Manual De Uso Y Mantenimiento

3.3.b - Electric hood connection
Concerning electric hood connection, follow the instruc-
tions supplied with the hood.
3.3.c - Unipotential connection (Fig 7)
The equipment shall be inserted in a unipotential system,
whose effectiveness shall be verified according to the
rules being in force.
A cascade connection shall be carried out among the
various oven components by using the screw (1) placed
on the rear oven side.
3.4 - OVEN POSITIONING (Fig 8)
DANGER
The oven shall not be installed closed to
inflammable walls such as furniture, parti-
tion walls, matchboarded coatings etc... A
safety range of at least 20 cms from lateral
and rear oven sides should be kept. No in-
flammable flooring shall be utilized to install
the oven on it.
• The oven shall be positioned on the final area follow-
ing the indications reported in figure 8, because they
indicate the minimum distances required to allow the
oven correctly to function.
• Fix the oven position by braking the rear wheels.
3.4.a - Chimney connection (Fig. 9)
• Place the fitting (2) on the chimney (1).
• connect the ø 100 mm fitting (2) with a natural draught
conduit or a hood.

3.5 - FIRST STARTING

DANGER
Once the oven is installed and before
starting it, carefully clean its inner part as
well as refractory surface as explained in
"Maintenance" chapter, also make sure
neither foreign nor inflammable bodies are
inside the oven.
• Start the oven as prescribed in "Functioning" para-
graph, making sure the set temperature is correctly
reached and the different options (according to the
concerned model) properly function.
EN - 14
MILLENIUM VALIDO
Installation and connections
FIG. 7
1
FIG. 8
200 mm 200 mm
FIG. 9
ø 100 mm
2
1