Self-Cleaning Cycle; Cutting Off - OEM MILLENIUM VALIDO Manual De Uso Y Mantenimiento

MILLENIUM VALIDO
Functioning
5.2.c - Baking time setting (Fig. 14)
• To set the baking time, simultaneously press the
and buttons for 3-4 seconds (the set time will be
shown on the display), then press the
decrease and the
You will automatically exit time setting after a few
seconds of inactivity.
The time can be set between 30 seconds and 9.55
minutes in steps of 5 minutes.
• To start the timer, simultaneously press the
buttons (the countdown time appears on the
display).
When the set time has been reached, 5 acoustic
warnings are given.
5.2.d - Self-cleaning cycle (Fig 15)
• At the end of each working day, a self-cleaning cycle
shall be carried out before cutting off the oven.
• Press the key or
to reach a 400°C temperature.
• Adjust ceiling capacity at 100% by operating the the
hand grip (1).
• Adjust the bedplate capacity at 100 % by operating
the hand grip (2).
• Leave the oven on for approximately twenty minutes,
then disconnect it to allow it to get cold.
5.2.e - Cutting off
• At the end of each working day, cut off the oven by
pressing the push-button
• In the event the extractor hood is functioning, let it
function for the time needed to carry out a self-cleaning
cycle.
• On restarting, the oven starts according to the data
being which were present before cutting it off.
button to
button to increase the time.
and operate the key
.
and
FIG. 14
FIG. 15
1
2
EN - 27