Steering Bars; Implement Coupling; Maintenance - Cleaning - Lubrication; Engine - GOLDONI ECO 3+2 Manejo Y Cuidado

4.6 STEERING BARS

The steering bars are vertically adjustable. These adjustments allow for 5
working positions. Adjust handlebar position by pushing lever n.10 fig.1.

4.7 IMPLEMENT COUPLING

The couple mounted on the mower makes implement coupling or release
extremely easy and quick.
Insert sleeve A fig.5 on the drive mechanism pushing notch C in the direction
shown by the arrow (narrow seating) until coupling B snaps completely into
position.
To release the implement, lift retainer B and push the mower back. When doing
this, release the wheels if necessary (refer to 4.3 above).

5. MAINTENANCE - CLEANING - LUBRICATION

5.1 ENGINE

Refer to engine instruction manual.

5.2 FILLING WITH OIL

5.2.1 GEARBOX

Check the level with the dipstick plug B fig.3.
It is advisable to use AGIP Blasia S 220 oil.
First oil change after the first 50-60 work hours.
Change oil after every 150 hours. Amount needed is around 2 kg.
Oil drain: plug A fig.2.

5.3 REGISTRATIONS AND CHECKS

5.3.1 Registering clutch lever

From time to time check the clutch lever. If the play is excessive, register with
screw E fig.4

5.3.2 Registering the throttle

To register throttle lever, adjust with the registration screw on the end of the
throttle wire at the engine.

5.3.3 Adjusting wheel release

Lever n.9 fig.1 must have a take-up of 2 mm before beginning to release the
wheel. Reset this play with screw n.11 fig.1.
32