Blade Installation; Hanging The Fan - LUCCI QUEST II 52 Manual De Instalación

Blade attachment
1. Before Installing the blades, remove the motor screws.
2. Assemble the blades & holders using the screw set.
3. Insert the hook of the blade holder into the square hole of motor.
4. Secure the blade on the motor by using 2 screws with washers to tighten it ensuring they are
tightened simultaneously. (Take care not to over tighten as this can damage blades)
Once completed, repeat the process on remaining blades.
1
3
Installing the down rod
The down rod has been pre-assembled.
Lift fan assembly onto mounting bracket.
Fig.5
Ensure the notch of the ball joint is
positioned on the stopper of mounting
bracket to prevent fan from rotating when in
operation.

BLADE INSTALLATION

2
4

HANGING THE FAN

6
Fig. 4
Fig. 5