Blade Installation - LUCCI NORDIC Serie Manual De Instrucciones De Instalación

Blade attachment
1. Assemble the blades (3) & holders (1) using the screw (2 ). (Fig. 9)
2. Secure the blade holder on the motor by using two motor screws (4) with washers to tighten it
ensuring they are tightened simultaneously. Once completed, repeat the process on remaining
blades.
1. Remove the 3 light kit screws (6, Fig.10) from light base.
2. Insert the pull chain (3, Fig.10) through the holes of light kit (4, Fig.10).
3. Connect the fan and light pendant (5, Fig.10) to pull chain.
4. Connect the quick connector (2, Fig.10), and then push them into the switch housing (1, Fig.10).
5. Attached the light kit to light base and align the screw holes, then secure light kit with 3 light kit
screws.
6. Insert and secure the light bulbs into the E27 sockets. (Bulb not included).
7. Carefully place the glass shade (2) cover over the lamp and secure it by the three spring clips (1).
Fig. 11.

BLADE INSTALLATION

Fig.9
LIGHT KIT INSTALLATION
7
Fig. 8