Oil Change - GENERGY TAVASCAN Instrucciones De Uso

8.1 Oil change.

1 Keep the engine running during 5 to 10 minutes for the oil to reach some
temperature and reduce its viscosity (more liquid). This way it will be easier to
extract it completely.
2 Place an appropriate container under the oil draining hole to collect the used oil.
3 Unscrew the oil draining screw plug by turning counter clockwise, keep the
screw and its joint.
4 Release the oil filling plug so the engine can intake air and achieve faster
draining.
OIL FILLER HOLE
OIL DRAINING PLUG
5 Once all of the oil has been extracted, place the draining screw again with its
joint and clean oil spillage, if any.
6 Refill with the recommended oil to the maximum level, without exceeding it. If
the machine is leveled, the oil should not exceed the level. (Check page 15 of this
manual for the type of oil).Oil capacity to the right level is about 0.52 gal.
7 Install the oil filling plug again
OIL FILLING PLUG
LEVEL DIPSTICK
OIL DRAINING HOLE
18
Maximum level
Minimum level