Personal Safety - TRAPP TRF 50 Manual De Instrucciones

3 - Personal safety

Beware with what is going on and use common
 
sense when operating the equipment. Do not use it
when you are tired, distracted or under the influence
of drugs, alcohol or medicine. A slight distraction
may result in a serious injury.
Wear protection equipment. Always wear goggles.
 
Wearing protection equipment like gloves, shoes,
and ear plugs increases your protection and reduces
the risk of an accident.
Wear proper clothes. Wear neither loose clothes
 
nor jewelry.
Take precautions against accidental running. Make
 
sure the switch is set to "off" before plugging the
equipment in. Failure to do so may cause a serious
accident.
Make sure the plug is not in or the spark plug cable
 
is not connected before submitting the shredder to
service, especially in the cutting set.
Remove all objects before turning on the
 
equipment. A tool or any other object stuck in the
movable parts of the equipment may result in an
injury.
4 - Use and care
Do not overuse the equipment. Use it in the right
 
way and for the purposes described in this manual
for better performance and safety while working.
Exceeding the green crop and grain feeding may
 
damage the equipment and lead to a warranty loss.
Feed the shredder in such a way that the rotation
does not abruptly decreases and if this occurs, wait
until the rotation reaches the normal condition and
continue with feeding on a gradual way.
Do not use the equipment if the switch does not
 
turn on/off. The equipment can not be controlled
if the on/off switch is damaged. A defective switch
shall be immediately repaired.
Turn the circuit breaker off, remove the spark plug
 
cable, remove the fuses or disconnect the plug from
the socket before conducting any adjustment or
replacing the cutting blade and accessories. These
preventive safety measures reduce the risk of an
accidental operation of the equipment.
48
Switch off the circuit breaker, remove the fuses or
 
unplug the equipment before servicing, substituting
the cutting blades and accessories. These safety
preventive measures reduce the risk of accidental
operation of the equipment.
Do not allow people that are not familiarized
 
with the equipment to use it. The equipment may
become dangerous in the hands of people not
familiar with its operation.
Preserve your equipment. Frequently check if
 
the movable parts are fixed, if any component is
damaged or check for any other condition that may
affect its optimum operation. Shall any problem
arise, fix it before using the equipment. Many
accidents are caused by lack of proper maintenance.
Keep the cutting blade sharp and the cutting
 
set clean so as to prevent excessive equipment
vibration caused by the disk imbalance.
The cutting blade keeps moving after the equipment
 
is switched off. Therefore be aware of that when
servicing. Never open the shredder's cover with the
cutting set in operation.
Use the equipment and accessories according to the
 
instructions in this manual. Take in consideration
the working conditions and the service to be done.
Using the equipment for operations not covered in
this manual may result in dangerous situations.
Note:
according to
NBR 5410, it is compulsory to install a device to protect
against residual differential current (DR device) in the
electrical installation of your residence. The function of
the "DR" is to protect the user against serious electrical
shock risk (consult an electrician).
5- Service
Call qualified professionals to service the
 
equipment. Use original parts only. Always
call TRAPP Authorized Service Technicians.
TRAPP is not responsible for occasional
accidents caused by the use of spare parts that
are not original.
www.trapp.com.br
the Brazilian standard