TRAPP TRF 50 Manual De Instrucciones página 65

www.trapp.com.br
Oil Change for the Gasoline Motor
All oils must correspond to API SG-SL classification.
1. Equipment must be on a flat and level surface.
Remove the oil plug (2) using an appropriate
wrench, protection glasses and appropriate gloves.
2. The oil will be more easily drained if it is already
warmed up and with the oil dipstick (1) open.
3. Collect used oil in proper container.
Attention!
If motor is hot when changing oil, be careful to
remove oil container. Hot oil is released with
more pressure, and may cause burns.
4. Do not discard the dirty oil and the oil package
as a common waste or in the environment, check
the oil manufacturer's recommendation for the
correct disposal.
5. When oil has been fully drained, screw back oil
container.
6. Remove cap 1 to access the crankcase and add
20W 50 oil according to the engine specification
on page 49 of this manual.
7. Check the level of oil with indicating rod. For
8. Discard the used oil and container in an
ATTENTION!
Use
!
TRAPP ORIGINAL
PARTS.
TRAPP does not undertake
responsibility for eventual
damages caused to the
equipment, neither for
accidents that may occur
due to the use of
non-original parts.
better reading, firmly hold cover on tube before
removing the rod. Keep oil at rod " Full " level.
appropriate place as recommended by the oil
manufacturer.
2
Note:
Frequently check level of motor oil to
 
prevent damage due to lack of oil.
1
65