Personal Safety - TRAPP ES-400 Manual De Instrucciones

3 - Personal safety

Beware with what is going on and use
 
common sense when operating the equipment.
Do not use it when you are tired, distracted
or under the influence of drugs, alcohol or
medicine. A slight distraction may result in a
serious injury.
Wear protection equipment. Always wear
 
goggles. Wearing protection equipment like
gloves, shoes, and ear plugs increases your
protection and reduces the risk of an accident.
Wear proper clothes. Wear neither loose clothes
 
nor jewelry.
Take precautions against accidental running.
 
Make sure the switch is set to "off" before
plugging the equipment in. Failure to do so may
cause a serious accident.
Remove all objects before turning on the
 
equipment. A tool or any other object stuck in
the movable parts of the equipment may result
in an injury.
4- Use and care
Do not overuse the equipment. Use it in the
 
right way and for the purposes described in this
manual for better performance and safety while
working.
Do not use the equipment if the switch does
 
not turn on/off. The equipment can not be
controlled if the on/off switch is damaged. A
defective switch shall be immediately repaired.
Switch off the circuit breaker, remove the fuses
 
or unplug the equipment before servicing,
substituting the cutting blades and accessories.
These safety preventive measures reduce the risk
of accidental operation of the equipment.
26
Do not allow people that are not familiarized
 
with the equipment to use it. The equipment
may become dangerous in the hands of people
not familiar with its operation.
Preserve your equipment. Frequently check if
 
the movable parts are fixed, if any component
is damaged or check for any other condition
that may affect its optimum operation.
Shall any problem arise, fix it before using the
equipment. Many accidents are caused by lack
of proper maintenance.
Keep the cutting blade sharp and clean.
 
The cutting blade keeps moving after the
 
equipment is switched off. Therefore be aware
of that when servicing.
Use the equipment and accessories according
 
to the instructions in this manual. Take in
consideration the working conditions and the
service to be done. Using the equipment for
activities not covered in this manual may result
in dangerous situations.
Note:
According to the Brazilian standard
NBR 5410, it is compulsory to install a device to
protect against residual differential current (DR
device) in the electrical installation. The function
of the "DR" is to protect the user against serious
electrical shock risk (consult an electrician).
5- Service
Call qualified professionals to service
 
the equipment. Use original parts only.
Always call TRAPP Authorized Service
Technicians. TRAPP is not responsible for
occasional accidents caused by the use of
spare parts that are not original.
www.trapp.com.br