Personal Safety - TRAPP TRR 180 Manual De Instrucciones

3 - Personal safety

Most accidents occur while the operator is using the

machine or during maintenance, and are caused by
lack of attention with basic safety precautions. It is,
therefore, important to be aware of the potential risks
of an action, paying attention to their effects.
Take precautions against accidental running. Make

sure the switch is set to "off" before plugging the
equipment in. Failure to do so may cause a major
accident.
Beware with what is going on and use common

sense when operating the equipment.Do not use it
when you are tired, distracted or under the influence
of drugs, alcohol or medicine. A slight distraction
may result in a severe injury.
Wear protection equipment. Always wear goggles.

Wearing protection equipment like gloves, shoes,
and ear plugs increases your protection and
reduces the risk of an accident.
Wear proper clothes. Wear neither loose clothes nor

jewelry as they can accidentally get caught by the
movable parts. If you have long hair, tie it safely.
Remove all objects before turning on the equipment.A

tool or any other object stuck in the movable parts of
the equipment may result in an injury.
4 - Use and care
Do not use the equipment if the switch does not turn

on/off.The equipment can not be controlled if the
on/off switch is damaged. A defective switch shall be
immediately repaired.
Switch off the circuit breaker, remove the fuses or

unplug the equipment before servicing, replacing
the cutting blades and accessories.These safety
preventive measures reduce the risk of accidental
operation of the equipment.
Do not overuse the equipment.Use it in the right

way and for the purposes described in this manual
for better performance and safety while working.
Do not allow people that are not familiarized with

the equipment to use it.The equipment may become
dangerous in the hands of people not familiar with
its operation.
Preserve your equipment. Frequently check if the

movable parts are secured, if any component is
damaged or check for any other condition that may
affect optimum operation. Shall any problem arise,
fix it before using the equipment. Many accidents
are caused by lack of proper maintenance.
54
Keep the cutting blade sharp and clean.

Use the equipment and accessories according to the

instructions in this manual. Take in consideration the
working conditions and the service to be done.Using
the equipment for operations other than those in this
manual may result in dangerous situations and risk
of accident.
Do not shred stones, glass, metals, plastic, packages

of chemical products (perfumes, cleaning products,
paint, etc.) or other materials that may damage the
shredder. For any material not recommended for
shredding, please contact with the factory.
Never keep the equipment for a long period with gas

in the tank. And, if it is necessary, keep the engine
working until it turns off due to the lack of fuel.
Attention!
The cutting blade keeps moving after the
equipment is switched off. Be aware of
that when servicing.
Note:
According to Brazilian standard
NBR 5410, the installation of a device to protect
against residual differential current (RD device)
in the electrical installation of your residence
is compulsory. The function of the "DR" is to
protect the user against serious electrical shock
risk (consult an electrician).
5 - Service
Call a qualified professional to service the

equipment. Use original parts only. Always
call TRAPP Authorized Service Technicians.
TRAPP is not responsible for occasional
accidents caused by the use of spare parts that
are not original.
www.trapp.com.br