BATTERY REPLACEMENT
NOTE: Do not mix old and new ba eries. Do not
mix alkaline, standard or rechargeable ba eries.
is safe uses 4 - AA ba eries. Under normal use,
ba eries will last about 1 year.
NOTE: If the ba eries are low, the yellow light will
ash when you start to enter your code.
To replace the ba eries, open the ba ery
compartment on the back of the door by pushing the
tab in the direction of the arrow and install all new
ba eries.
TURNING THE KEYPAD SOUND
OFF/ON
Your safe comes with the "Beep" sound turned on.
You can turn o the "Beep" sound of the keypad
by pressing the
... key.
To turn the "Beep" sound on, press the
key again.
SELECTING A LOCATION
e safe must be mounted to a wall stud, and to a
permanent shelf or the oor. For optimal safety
and security, the safe should be installed in an
isolated, dry and secure area.
THE SAFE SHOULD ALWAYS BE KEPT
OUT OF THE REACH OF CHILDREN.
SECURING THE SAFE
NOTE:
stud, and to a permanent shelf or the oor.
Failure to do so will compromise the safety and
security of the safe.
NOTE ON LOCKING THE SAFE:
needs to be in an upright position, as shown in
gure 1, for the locking mechanism to function
properly. Failure to mount the safe in the correct
upright position will compromise the safety and
security of the safe.
Figure 1
....
is safe must be mounted to a wall
PS-1514
PS-1515
PS-1415-RTX
PS-1508
e safe
PS-1520
3
18
40531-1506