Getting Started; Installing The Battery - STACK-ON QAS-1514-B Manual Del Instrucciones

GETTING STARTED

When you rst receive your safe you will need to
open the door with the key in order to install. A
ba ery is included and is located in the top of
the Styrofoam packaging.
NOTE: is key has also be provided in case
the ba eries run low. If you lose your key,
you may purchase a replacement key by
referencing the serial number located on the
front of the door. See section regarding
replacement keys for further information.
To open the safe, insert key into lock and turn
counter clockwise until the holster
compartment automatically opens.
To access the ba ery compartment you will
need to open the holster compartment
completely.
At the very back of the compartment you will
see two L shaped brackets. Rotate the L
brackets towards the top of the safe, so they are
released from the guides
brackets together so they almost meet - this will
immediately release the compartment from the
sides of the safe body as shown in gure 1. Let
the holster compartment open all the way.
Rotate the L brackets back so they are at
against the back of the holster compartment as
shown in gure 2.
en squeeze the two
1

INSTALLING THE BATTERY

NOTE: Leave the key in the lock while you
install the ba eries.
is safe uses 4 AAA alkaline ba eries. Under
normal use the ba eries will last about a year.
NOTE: If the ba eries are low the indicator light
will ash blue when you start scanning. Replace
with 4 new AAA alkaline ba eries as shown.
Locate the ba ery compartment at the very
back of the top of the safe, slide o the ba ery
cover.
Battery Cover
Battery
4
Inside safe
40667-1512
2
15