Moving The Machine; Removing The Header Assy And Side Poles - NAMCO GUNMEN WARS Manual Del Operador

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 10

4. MOVING THE MACHINE

This machine is fitted with castors to make it easier to move. Take care when
moving the machine on an inclined surface.
The overall height of the machine is 2080mm. Take care of any overhead
obstructions. (e.g. Light Fittings, Electric Cables etc.)
When moving the game, ensure that the game is dis-assembled into 2 parts:
Monitor Assembly and Front Assembly.
The Front Assy is unstable when seperated from the Monitor Assy. Take care
that theFront assy does not over balance backwards or forwards when
moving.
Note: The Front assembly can be further dismantled by removing the Header
assembly and Side poles. (see 4-1 below)

4-1 Removing the Header Assy and Side Poles

The header assembly is heavy, approx 20kg. ensure that at least 2 people are
available to remove the header assy and that there is sufficient space to work.
1.
Remove the 6off security screws (M5x16) and remove the frame cover.
Security screw (M5 × 16)
Frame cover
Security screw (M5 × 16)
Page 32
Tabla de contenido
loading

Tabla de contenido