4.
Disconnect the connector inside the Gun Base assembly.
Gun base assembly
Connector
5.
Remove 4off hex head screws (M8x45) and remove the Side Pole.
Note: The side pole is 1.92m high and approx 10kg. Ensure that at least
two people are available to remove the side pole, and that there is
adequate workspace.
6.
Repeat to remove the other Side Pole.
7.
Reassemble in reverse order.
Hex head screw (M8 × 45)
Hext head screw (M8 × 45)
Page 34
Side pole