Gun Test - NAMCO GUNMEN WARS Manual Del Operador

6-3-3-3 Gun Test

1. Select 'GUN TEST' from the I/O Test Screen. The following screen is
displayed:-
2. Select EXIT and press the Enter button to return to the I/O TEST
screen.
Upon selecting the GUN TEST screen, the blue LED on the gun will flash
on and off regularly.
Note about the blue LED:
The GUN LED on the display will change alternately between ON and
OFF as the blue LED flashes on and off.
If the gun trigger is operated during this test, the GUN TRIGGER,
SOLENOID and GUN LED displays will change to green, the blue LED
will flash dimly and the solenoid will operate.
•
Twisting the gun left and right will cause the numbers displayed
against GUN YAWING RIGHT and GUN YAWING LEFT to change
(about -1350 ~ 1350). OK will be displayed just before the gun is
twisted fully left or right.
•
Sliding the gun left, right, forward or backward will cause the
numbers displayed against SLIDE FORWARD, SLIDE BACK, SLIDE
RIGHT and SLIDE LEFT to change (about -900 ~ 1500 forward, -
1500 ~900 backward and -1200 ~ 1200 left and right). OK will be
displayed just before the limit of travel.
Note: If OK is not displayed as above initialize the gun.
(see section 6-3-3-4 page
I/O TEST
12345678 [ON=RED]
DIP 4
LINK ON 2
GUN TEST
GUN TRIGGER
SOLENOID
GUN LED
GUN YAWING RIGHT
GUN YAWING LEFT
SLIDE FORWARD
SLIDE BACK
SLIDE RIGHT
SLIDE LEFT
EXIT
ENTER SW : ENTER
49).
Page 48
OFF
OFF
OFF
0000
0000
0000
0000
0000
0000