1.
Remove the Gun Grip Decals L & R
2.
Remove 3off cap bolts (M4x45), 1off cap bolt (M4x20), 4off hex box nuts
and 4off nylon c/sunk screws (M4x12) and remove the Gun Sides Left
and Right.
Nylon c/sunk screw (M4x12)
Hexagon box nut (M4)
Gun side (L)
Nylon c/sunk screw (M4x12)
3.
Disconnect the solenoid connector.
4.
Remove 1off nylon nut (M4), withdraw the plunger pin and remove the
barrel.
Hexagon box nut (M4)
Cap bolt (M4 × 45)
Plunger pin
Connector
Solenoid
Cap bolt (M4 × 45)
Cap bolt (M4 × 45)
Barrel
Nylon nut (M4)
Page 63
Cap bolt (M4 × 20)
Gun side (R)
Nylon c/sunk screw (M4x12)
Gun grip decal