Replacing The Gun Assembly - NAMCO GUNMEN WARS Manual Del Operador

8-3 Replacing the Gun Assembly

1. Remove the Gun Vac-Forms Upper and Lower.
2. Remove 2off pozi head screws (M5x20) and 2off pozi head screws (M5x16),
complete with spring and flat washers, and remove the Gun Frame B.
Pozi pan head screws
(with plain and spring washers)
(M5 × 20)
3. Disconnect the connectors.
4. Remove 4off hex head screws (M8x25) and remove the Gun Assembly.
Hex head screw (M8 × 25)
5. Reassemble in reverse order.
Note: Reinitialize the gun after replacing the gun assembly
Pozi pan head screws
(with plain and spring washers)
(M5 × 16)
Gun frame B
Page 61
(see 8-1 page 59
Gun Assy
Hex head screw (M8 × 25)
)
56)
(see 7 page