Tool Parts; Technical Details; Safety Devices - CAMPAGNOLA TRONIC STAR Manual De Uso Y Mantenimiento

3 - SPECIFICATIONS

3.5 Tool parts

Pos. Description
1 Braces buckles
2 Battery set
3
Blade opening switch
4 Battery fuse
5 Belt buckles
6 Battery and electronic card box back-pack
7 Battery charger plug
8 ON-OFF switch
9 Electronic card box
10 Progressive/automatic cut selecting switch
11 Power Cable
12 Shell screws
13 Active safety catch
14 Trigger
15 ON–OFF light
16 Mobile blade
17 Blades group
18 Anvil
19 Trigger guard
20 Feeding plug
21 Battery charger
22 Battery charger green light
23 Battery charger red light
24 Battery charger connector
25 Voltage selector
26 Battery charger fuse
27 Braces
28 Cable arm fastener
29 Holster
30 Locking nut
31 Teethed part
32 Blade pin
33 Cotter
34 Flared-headed screws

3.6 Technical details

• Shear weight: ................................................................................ 880 gr
• Weight of battery, electronic card box and back-pack: .................. 3,5 kg
• Blade opening: ............................................................................. 30 mm
• Battery voltage: ................................................................................ 48 V
• Battery: ....................................................................................... NI – mH
• Average battery re-charging time: ............................................ 7-8 hours
• Battery endurance: .................................................................... 14 hours
• Automatic battery charger with partial electronic processing
• Battery charger voltage, as described in its plate.

3.7 Safety devices

• Built-in safety device: stops the shear automatically in case of motor overheating, due to heavy cuts of large diameter
branches or hard wood.
• ON-OFF light (15): indicates the shear is working.
• Active safety catch (13): inserts itself automatically when the trigger is released (14), avoiding the tool accidental operating.
• Guard (19): protects the trigger (14) from accidental operating.
• Holster (29): necessary to carry the shear safely.
18 - 56
Function
Fasten the braces to the back-pack
Operate the shear
Selects the blade opening from 100% to 60%
Protects the batteries from voltage changes
Fasten the back-pack
Contains batteries and electronic card box
Connects the battery charger with the electronic card box
Switches the shear on and off
Contains the electronic card for operating the shear
Selects the progressive or the automatic cutting mode
Connects the shear with the electronic card box
Lock the shear shells
Locks the trigger automatically
Operates the shear
Indicates if the shear is on or off
Cutting blade
Cutting parts
Fixed blade
Protects the trigger from accidental operating
Connects the battery charger with the electric network
Recharges the batteries
Charges the battery connected to the electric network
Indicates that the battery charger is working
Connects the battery charger with the electronic card box
Allows to select either 115 V or 230 V tension
Protects the battery charger from voltage changes
Hold 10% of the back-pack weight
Keeps the cable off the operator's movements
Protects the shear during the transport
Locks the blades pin
Transmits the cutting motion to the mobile blade
Locks the blades
Connects the blade with the teethed part
Lock the anvil in the shear body
Pict. No,
A
A-E
A-E
A-E
A
A-E
A-E
A-E
A-E
A-E
B
A
B
B
B
B-G
B
B-G
B
C
C
C
C
C
D
D
F
F
F
G
G
G
G
G