Product Description; Intended Use And Operation; Contraindications; Technical Data, Highsurg - Nouvag HighSurg 30 Instrucciones De Uso

1

Product description

1.1

Intended use and operation

The HighSurg 30 in connection with an electronic motor and a corresponding handpiece (separate medical
product) is applied in general surgery (drilling and milling) by 1 : 1 handpieces with FG-shank, as well as in
further different medical fields:
Plastic Surgery: by K-Wire Handpiece, Dermatomes, Tattooing handpiece
Spinal Surgery: by Spinal Burr Handpieces, Saws, Multiplier Handpiece.
Head and Neck Surgery/Skull Surgery/ENT Surgery: by straight and angled Drilling Handpieces 1 : 1,
Saws, Craniotomes, Perforators as well as by straight and angled Shaver Handpieces (Micro Debriders).
Orthopedics/Arthroscopy: by straight and angled Drilling Handpieces 1 : 1 and 4 : 1, K-Wire Handpiece,
Saws as well as by straight and angled Shaver Handpieces (Micro Debriders).
The patient group is not limited by age, weight or gender.
The setting up and operation of the HighSurg 30 must be carried out by the physician or by a qualified
especially trained medical personnel.
1.2

Contraindications

Relative or absolute contraindications can arise from the general medical diagnose, or in special cases by a
significantly increased risk to the patient through the use of motor-driven systems.
Relevant cases in the literature must be taken into consideration.
1.3

Technical data, HighSurg 30

Voltage: -------------------------------------------------------------------------- variable: 100 V / 115 V / 230 V , 50–60 Hz
Fuse, power supply: --------------------------------------------------------------------------------- 2 fuses, T 3.15 AL 250 V AC
Power consumption: ---------------------------------------------------------------------------------------------------------- 120 VA
Applied part: ----------------------------------------------------------------------------------------------------------------- Type BF*
Protection class: --------------------------------------------------------------------------------------------------------------- Class I
Dimensions (W x D x H): ------------------------------------------------------------------------------------ 260 x 250 x 110 mm
Net weight control unit: ------------------------------------------------------------------------------------------------------- 3.7 kg
Motor:
Motor coupling: ------------------------------------------------------------------------------------------- Intra coupling ISO3964
Motor speed: --------------------------------------------------------------------------------------------------- 300 - 50,000 rpm**
Max. Motor torque: ----------------------------------------------------------------------------------------------------------- 6 Ncm
Motor weight: ---------------------------------------------------------------------------------------------------------------- 0.280 kg
Motor cable length ----------------------------------------------------------------------------------------------------------------- 3 m
Pedal:
IP code (pedal) --------------------------------------------------------------------------------------------------------------------- IPX8
------------------------------------------------------------------------
** Optional available, Motor with a max. speed of 80,000 rpm and Motor 16 with integrated OTO-Drill Handpiece with 16'000 rpm.
1.4

Ambient conditions

Relative humidity:
Temperature:
Atmospheric pressure:
1.5

Warranty coverage

Purchasing the HighSurg 30 entitles you to a 1-year warranty. If you return the warranty card for
registration within four weeks of the date of purchase, warranty coverage will be extended for a further
6 months. Consumable parts are not covered by the warranty. Improper use or repair, or failure to observe
these instructions, relieve us from any obligation arising from warranty provisions or other claims.
2
All manuals and user guides at all-guides.com
Transport and storage:
Max. 90%
0°C – 60°C
700 hPa to 1060 hPa
*Applied part of Type BF is the instrument used with the HighSurg 30.
Operation:
Max. 80%
10°C – 30°C
800 hPa to 1060 hPa
HighSurg 30 Operating Instructions, Ref. 31666, V24/16
HighSurg 30