Routine Cleaning And Maintenance - Tecno-gaz STERILAIR PRO Manual Del Usuario

ENGLISH
ROUTINE CLEANING AND MAINTENANCE
In order to maintain the performance and efficiency of the lamp germicide, it is
important to strictly comply with the maintenance program attached to the device.
Do not use water jets or sprays for cleaning,
Use a brush to remove dust build‐up on the air inlet and outlet vent at least every month.
Use a soft moist cloth to remove dust build‐up from the structure.
BEFORE EVERY INTERNAL MAINTENANCE OPERATION UNPLUG THE DEVICE!
Every 3 months (approximately 2,000 hours) replace the filter inside the air
inlet vent (Spare filter: Art. SSAA015).
Follow these instructions step‐by‐step to replace the filter:
1. Take the supplied L‐shaped key ( 3MECL0001) specific for
TORX safety screws (Fg.6) and unscrew the front part;
2. Remove the front of the vent where the filter is housed.
(Fg.7)
3. Replace the filter (SSAA015).
4. Put the front of the vent back on in the order shown in Fg.7.
FILTRO: SSAA015
16
Fg.6
Fg.7