KaVo IXS 1.013.9910 Manual Del Usuario página 9

8. Grasp the sensor and Positioning System and remove the sensor from
under the retaining clips.
9. If needed, grasp the USB connector and pull it straight out of the port on the
computer.
Important:
Pedodontic Placement Techniques
When you are placing a sensor in the mouth of a child, you will often face the same
challenges that you face with placing film in their mouths. Keep in mind that although
the sensor is larger than a film pack, it is also smoother. This will work to your
advantage.
Here are some techniques that will help you succeed in using the sensor in children
when standard techniques fail. You may be familiar with many of them, since they
work not only for the KaVo IXS size 1 sensor, but for film as well.
To begin, you should set the child up for X-rays both physically and psychologically;
that is, ready their mouths and their minds. Use diversion when necessary. In
addition, consider the size of the pedo film relative to the sensor. Also consider what
information you need to gather from the X-ray and use that part of the sensor that
will enable you to capture the information you need.
Avoid saying the word tongue, since it might cause the tongue to act
•
involuntarily.
Have the child focus on the end result — an instant image of their
•
teeth. If they can see the monitor, this will give them incentive to
cooperate. Most children are very comfortable with computers and will
be impressed to see an X-ray of their teeth on the screen.
Place your finger in the areas where you plan on placing the sensor.
•
Let the patient hold the sensor in the mouth (without biting it) to get
•
used to the feel of it.
Physically divert focus to something other than the sensor. Have the
•
child place his or her finger on their arm, hold the holder, or make a
certain sound.
English
Any Serious incident that has occurred in relation to the KaVo
IXS Sensor should be reported to Technical Support at 1-888-
ASK-KAVO and also the competent authority of the Member
State.

Also, in the event of a sensor malfunction or a noticeable
change in image quality, it is recommended to immediately
cease the use of the device on the patient and call Technical
Support at 1-888-ASK-KAVO.
5