Condensate Drain Connection - Ferroli ENERGY TOP W 70 Instrucciones De Uso, Instalación Y Mantenimiento

All manuals and user guides at all-guides.com
ENERGY TOP W 70

2.7 Condensate drain connection

The boiler is equipped with a trap to drain condensate. Carry out the following instructions for fitting.
1. Fix the support bracket "A" to the bottom of the boiler.
2. Connect the preformed black tube "B" to the condensate drain "S" on the bottom of the boiler, fixing it with a clamp.
3. Remove the trap ring nut "C" and insert the preformed black tube "B" in the special opening, making sure to fit the
seal "D".
4. Refit the trap ring nut, insert it in the bracket and fix with the special clip "E".
5. Connect the flexible tube "F" from the trap to the condensate drain system.
fig. 23 - Condensate drain connection
19
EN
cod. 3540M640 - 07/2008 (Rev. 00)