Motorola PMPN4531 Manual Del Usuario página 15

Charger Indication
Blinking amber
2.3
Combining the Multi-Unit Chargers
Prerequisites:The maximum unit of multi-unit charger that can be combined is four.
Procedure:
1 Place the chargers on the table for support before combining them.
2 To extend the connector, press and push the male connector latch to the left.
3 To combine the chargers, connect the male connector to the female connector.
The magnets of the chargers stick together magnetically.
4 Hold the sides of the combined chargers when moving to another location.
Description
Battery is in standby mode waiting to be charged.
NOTICE: Battery might be too hot, too cold or low
voltage.
MN007338A01-AC
Chapter 2: Charger Operations
15