Cuisinart RHB100E Instrucciones página 20

Whisk attachment – This attachment is great for incorporating air and can be used to whip
cream, egg whites for meringues, batters or mousses (plus any other task that you would normally
whisk by hand).
Blending Jug – This is recommended for use with the blending shaft for cool/lukewarm
ingredients only, the high sided jug is ideal for blending ingredients without splashing.
Mini Chopper – This is great for chopping vegetables, such as onions, into smaller pieces and can
be used to make dips and dressings. It can also be used when making pate (such as mackerel or
chicken liver) and sauces, such as pesto. It's also ideal for making breadcrumbs and for chopping
herbs and spices.
C. ASSEMBLY
/
On the main unit, there are symbols, these match up with the arrows which are shown on
each attachment. (See Fig. 1)
Blending shaft
Place the main unit onto the blending shaft and twist anti-clockwise until the arrow on the
blending shaft aligns with the lock symbol on the main unit.
Whisk Attachment
Ensure the whisk attachment is fitted onto its gearbox, by pushing the two pieces together,
until you feel them connect securely into place. Place the main unit onto the assembled whisk
attachment and, holding the gearbox section, twist the whisk anti-clockwise until arrow on the
gearbox aligns with the lock symbol on the main unit.
Mini Chopper
Place the main handle onto the lid of the mini chopper, hold the attachment securely and twist
the main unit anti-clockwise until the arrow on the attachment aligns with the lock symbol on
the main unit.
N.B. The lid needs to be on the mini chopper before the main unit is attached. (Fig. 2)
D. REMOVING THE ATTACHMENTS
To remove each attachment, hold the main unit with one hand and with the other hand twist the
top of the attachment clockwise (then arrow symbols should align with the unlock symbol on the
main unit) then pull away from the main unit.
NOTE: When removing the whisk assembly, take care not to grasp the stainless steel whisk
attachment itself (use the whisking gearbox instead).
E. OPERATION
To operate the hand blender, press and hold the 'Safety unlock' button until the blue lights
illuminate, then press the power button to start the appliance (Fig. 3)
N.B. The appliance has a safety feature and will automatically lock again after the power button is
released for more than 1.5 seconds. Follow the same sequence as above to re-activate the blender.
N.B. To Pulse, press and hold the 'Safety unlock' button to activate the unit, then repeatedly press
the 'On/Off' button as desired.
NOTE: The product comes with an overload protection feature. If the unit stops unexpectedly, it
will cut out and the battery power indication light will flash blue.
You can reactivate by pressing the 'Safety unlock' button and the 'On/Off' button.
18