Adjusting The Tilt Sensitivity - NAMCO PAC-MAN BALL Manual Del Usuario

4-3

Adjusting the Tilt Sensitivity

The machine is equipped with a tilt device. If the machine is shaken excessively, the
tilt device activates an alarm sound and closes the divider of the Payout Assy to
prevent coins falling to the payout tray.
To reset the game after the tilt has been activated
1. Remove 6off pozihead screws (M4x30) and remove the Rear Door.
2. Loosen the grub screw (M3x6) on the weight, and slide the weight up or down to
adjust the sensitivity. Moving the weight up will decrease sensitivity and moving
the weight down will increase sensitivity. Re-tighten the grub screw (M3x6).
3. By loosening 2off pozihead screws, the actuator bracket can be moved to ensure
that the weight is central to the actuator.
If the actuator bracket cannot be adjusted so that the weight is central, the
machine is not level. Adjust the level adjusters,
machine is level.
Weight
Actuator
Grub screw (M3x6)
Less Sensitive
Adjustment range
More sensitive
Weight
Page 37
see 5-3 page 46
(see 4-2 page 36),
Tilt mechanism
until the